MikroElektronika mikroProg Manual do Utilizador descarregar pdf (Página 8)

mikroProg Suite for PIC

MikroElektronika

page

2.0. Loading .hex File into the Program

For programming the microcontroller, it is necessary to write a program in the appropriate compiler rst. The program is compiled

then and a .hex le used for programming the microcontroller is generated. Prior to loading the .hex le into the program, select family

and type of the microcontroller to be programmed. Use the MCU Family option to select the microcontroller family. By clicking on this

option, a drop-down list with available microcontroller families will appear. Select the microcontroller type you want from the drop-

down list that appears by clicking on the MCU option. Load the .hex le into the mikroProg Suite for PIC program by clicking on the

Load button. The .hex le can also be loaded via the keyboard shortcut Ctrl+O or the Load HEX option from the File menu. By right

clicking on any part of the main window, an extra window including different options will appear. One of them is the Load HEX option.

An alternative way of loading a .hex le is by dragging and dropping it on any portion of the program’s main window.

Figure 2-3: HEX le options

Figure 2-4: Loading .hex le via the File

menu by clicking on the Load HEX option

Figure 2-5: By right clicking on any portion of

the program’s main window, a menu containing

programming options will appear. One of them is the

Load HEX option

Figure 2-1: MCU family selection

Figure 2-2: MCU type selection

MCU Family option

MCU option

MCU drop-down list contains all

microcontrollers belonging to PIC16F family

After connecting the hardware programmer/development system, the program automatically

recognizes which microcontroller families are supported by the connected device. When

the connection is established, choose the family and type of the microcontroller to be

programmed.

By pressing the Ctrl and O keys at the same time, an option for .hex le loading becomes

available on the screen.

The mikroProg Suite for PIC program enables you to load the .hex le by simply dragging

and dropping it on any portion of the program’s main window (drag and drop).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sem comentários

MikroElektronika mikroProg Manual do Utilizador Página 8